Step-by-Step Method Based on Cementitious Materials Dosage
Accurate dosage of superplasticizer polikarboksilat is crucial for concrete performance. This guide presents a practical calculation approach to prevent overuse or underuse, using cementitious materials as the foundation.
- Determine Total Cementitious Materials Weight
First, calculate the sum of all cementitious components. Include cement, fly ash, slag, and other mineral admixtures in your mix design. For example, if your mix has 300 kg cement, 100 kg fly ash, total is 400 kg.
- Establish Base Dosage Rate
Next, select a typical dosage rate for polycarboxylate superplasticizer. Most superplasticizer polikarboksilat products recommend 0.8%–1.5% of cementitious materials by weight. Start with the lower end (e.g., 1%) for initial calculations to avoid excess. - Adjust for Mixture Characteristics
Then, modify the base rate based on specific factors. Increase dosage by 0.1%–0.3% if using high-absorption aggregates or low-slump requirements. Reduce by 0.1% for super-fine mineral admixtures or high-water-cement ratios. - Perform Trial Batch Testing
After calculating, conduct a trial batch. Measure slump, setting time, and air content. Compare results with target specifications. Adjust superplasticizer polikarboksilat dosage incrementally (0.05% steps) until performance meets requirements. - Refine with Excel Template
Streamline calculations using our free Excel template. Input cementitious materials weights, base rate, and adjustment factors. The tool automatically computes optimal polycarboxylate superplasticizer dosage. Download Template Here.
By following these steps and using the template, you can precisely control superplasticizer polikarboksilat dosage. This method ensures consistent concrete quality, reduces material waste, and enhances project efficiency.
Tim Téknis Profésional Kami Sadia 24/7 Pikeun Ngabéréskeun Masalah Anu Anjeun Tiasa Nalika Nganggo Produk Kami. Kami ngarepkeun Kerjasama Anjeun!
